JFOPT CO.,LTD.
FUTURE COMING CLOSER
Add to Cart
MPO Switchable Polarity Trunk Cable With A/B Polarity Conversion And Key Reversal
The switchable polarity MPO connector allows polarity conversion without tools. With its unique dual-sided Key design, it enables A/B polarity conversion for 12-fiber and below connectors. JFOPT's self-developed switchable polarity MPO connector complies with the MPO connector requirements of the IEC standard and offers advantages such as tool-free operation and lower cost compared to USCONEC's MTP PRO switchable polarity connector.
♦ Features
| ① Interchangeable polarity MPO connector | ② Dual-sided Key for polarity reversal | ||||
|
|
| ||||
| ③ Tool-free operation for convenient use | ④ A/B polarity interchange for 12-fiber and below configurations | ||||
|
|
| ||||
| ⑤ Optional features such as short boot/push-pull tab, etc | - | ||||
|
| - | ||||
♦ Applications
1.Data center room wiring.
2.40G/100G optical communication systems, QSFP optical modules.
3.Fiber optic communication systems, cable TV networks, telecom networks.
4.Local area networks (LANs), wide area networks (WANs), FTTx.
♦ MPO Connector Parameters
| Connector Type | Insertion Loss | Return Loss | |||
| Typical | Maximum | ||||
| MPO Connector | SM Standard | 0.2dB | 0.75dB | APC≥60dB | |
| SM Low Loss | 0.1dB | 0.35dB | |||
| MM Standard | 0.2dB | 0.6dB | PC≥25dB | ||
| MM Low Loss | 0.1dB | 0.35dB | |||
| Male/Female | Male: with Pin, Female: without Pin | ||||
♦ 3D Geometric Parameters
| Items | Max | Min | ||
| Radius of curvature (mm) | X | 2000 | -10000 | |
| Y | - | 5 | ||
| Angle (°) | X | 0.15 | -0.15 | |
| Y(APC) | 8.2 | 7.8 | ||
| Y(PC) | 0.2 | -0.2 | ||
| Radius of curvature of optical core (mm) | - | 1 | ||
| Fiber height (nm) | 3500 | 1000 | ||
| Height difference of adjacent fiber (nm) | 500 | N/A | ||
| Maximum negative coplanar (nm) | 300 | N/A | ||
♦ Optical Cable Parameters
| Item | Parameter | |||
| Fiber Type | Optional G652D/G657A1/OM1/OM2/OM3/OM4/OM5 | |||
| Fiber Count | Optional 8/12/16/24 | |||
| Strength Member | Aramid yarn | |||
| Outer Jacket Material | Optional LSZH/PVC/TPU | |||
| Outer Jacket Diameter | 3.0mm | |||
| Outer Jacket Color | Yellow / Orange / Green / Heather Violet / Customization | |||
| Tensile Strength (Long-term) | 80N | |||
| Tensile Strength (Short-term) | 150N | |||
| Crush Strength (Long-term) | 100N/cm | |||
| Crush Strength (Short-term) | 500N/cm | |||
| Minimum Bending Radius (Dynamic) | 20D | |||
| Minimum Bending Radius (Static) | 10D | |||
| Operating Temperature | -20~60℃ | |||
| Storage Temperature | -20~60℃ | |||
| Fire Rating | Optional OFN/OFNR/OFNP | |||
| Item | Parameter | |||
| Fiber Type | Optional G652D/G657A1/OM1/OM2/OM3/OM4/OM5 | |||
| Fiber Count | 2~12 | |||
| Strength Member | Aramid yarn | |||
| Outer Jacket Material | Optional LSZH/PVC/TPU | |||
| Outer Jacket Diameter | 2.5x5.0mm | |||
| Outer Jacket Color | Yellow / Orange / Green / Heather Violet / Customization | |||
| Tensile Strength (Long-term) | 100N | |||
| Tensile Strength (Short-term) | 200N | |||
| Crush Strength (Long-term) | 200N/cm | |||
| Crush Strength (Short-term) | 500N/cm | |||
| Minimum Bending Radius (Dynamic) | 50mm | |||
| Minimum Bending Radius (Static) | 30mm | |||
| Operating Temperature | -20~60℃ | |||
| Storage Temperature | -20~60℃ | |||
| Fire Rating | Optional OFN/OFNR/OFNP | |||
♦ Connector Housing Color Options
| MPO connector | ||||
| SM | Green | Yellow | ||
| Reference color number PANTONE 2270C | Reference color number PANTONE 100C | |||
|
|
| |||
| MM | Beige | Aqua | ||
| Reference color number PANTONE 7534C | Reference color number PANTONE 2226C | |||
|
|
| |||
| Violet | - | |||
| Reference color number PANTONE 7641C | ||||
|
| ||||
♦ Boot Options
| MPO boot | ||||
| Type | Specification | Applicable cable | Picture | Drawings |
| Round boot | 3.0 boot length 33mm | 3.0/3.2 |
|
|
| 3.0 boot length 17mm | 3.0/3.2 |
|
| |
| 4.0 boot length 33mm | 3.8/4.0 |
|
| |
| Square boot | 3.0 boot length 25mm | 3.0/3.2 |
|
|
| 4.0 boot length 17mm | 3.8/4.0 |
|
| |
| Ribbon Cable boot | 2.5*5.0 boot length 22mm | 2.5*5.0 |
|
|
| Bare Ribbon fiber boot | Bare Ribbon fiber boot length 19mm | Bare Ribbon Fiber |
|
|
♦ Interchangeable polarity operation
♦ Polarity Selection
| 12F Patch Cord | ||||
|
|
♦ Product Packaging
|
|
|
| Thickened anti-static bag | Thickened carton |
♦ Factory Strength
| Specialization: JFOPT has focused on the production of MPO jumpers for more than 10 years. With professional technology and a full set of first-class brand equipment (SUMIX/JRG/OPTOTEST), it can produce high-quality, high-performance MPO jumpers. |
| ||||
| Manufacturing capacity: JFOPT has 5 MPO production lines, allowing the rapid and efficient production of a large quantity of MPO trunk cables to meet customer demands. |
| ||||
| Quality Control: JFOPT implements strict quality control measures at every stage, from raw material procurement to production processes, with professional quality inspection and monitoring. We conduct 100% 3D interferometer testing/IL&RLtesting/end-face inspection to ensure product quality. |
| ||||
| Setting standards: JFOPT can formulate and strictly implement MPO jumper production standards according to user needs to ensure product consistency and performance stability. |
| ||||
| Technological innovation: JFOPT focuses on technological innovation and has a professional R&D team to continuously develop MPO jumpers with more advanced functions and higher performance. |
| ||||
| Service and Technical Support: JFOPT provides comprehensive pre-sales and after-sales services, including technical consultation, product recommendation, after-sales maintenance, etc., to meet customer needs and ensure customer satisfaction. |
| ||||
♦ Frequent Q&A
1.What issues should be considered when customizing MPO jumpers?
Jumper length / Cable material / Fiber type and fiber count / Male or female connectors / Insertion loss standards / Color requirements / Labels and customization requests.
2.How do we ensure stable parameters for our MPO jumpers?
JFOPT's MPO jumpers undergo 100% 3D interferometer testing and 100% IL&RL testing, ensuring stable parameters.
3.What is our delivery lead time?
We have a monthly production capacity of 30,000+ MPO connectors, ensuring prompt delivery.
4.What other MPO-related products do we offer?
In addition to MPO jumpers, we also produce MPO loopbacks, MPO attenuators, MPO male to female adapters, MT jumpers, and other MPO-related products.